| |
| 科研成果 |
|
|
 |
|
| 论文题目： |
An analysis on the energy consumption of circulating pumps of residential swimming pools for peak load management |
| 第一作者： |
Song CH(宋纯贺);Jing, Wei;Zeng P(曾鹏);Rosenberg, Catherine |
| 参与作者： |
|
| 联系作者： |
|
| 发表刊物： |
Applied Energy |
| 发表年度： |
2017 |
| 卷,期,页： |
195,,1-12 |
| 论文出处： |
|
| 第一作者所在部门： |
|
| 论文编号： |
|
| 论文摘要： |
Based on an extensive dataset containing aggregated hourly energy consumption readings of residents during March 2011 and October 2012 in South Ontario, Canada, this paper estimates the energy consumption of circulating pumps of residential swimming pools (CPRSP) non-intrusively, and quantifies the impact of CPRSP on the power system. The main challenges are that, first, widely used non-intrusive appliance load monitoring (NIALM) methods are not applicable to this work, due to the low sampling rate and the lack of the energy consumption pattern of CPRSP; second, temperature-based building energy disaggregation methods are not suitable for this work, as they highly depend on the accurate base load estimation and predefined parameters. To overcome these issues, in this paper, first it is found that, during the pool season, for homes with and without swimming pools, the ratio between their base loads is approximately equal to the ratio between their temperature-dependent energy consumptions, then a novel weighted difference change-point (WDCP) model has been proposed. The advantages of the WDCP model are that, on one hand, it doesn't depend on the base load estimation and predefined parameters; on the other hand, it has no requirement on the data sampling rate and the prior information of energy consumption patterns of CPRSP. Based on the WDCP model it is shown that, the average hourly energy consumption of CPRSP is 0.7425 kW, and the minimum and the maximum hourly energy consumptions are 0.5274 kW at 9:00 and 0.9612 kW at 17:00, respectively. At the peak hour 19:00, July 21, 2011, CPRSP contributes 20.36% energy consumption of homes with swimming pools, as well as 8.48% peak load of all neighborhoods. As a result, the peak load could be reduced by 8.48% if all CPRSP are stopped during the peak hour. |
| 论文全文： |
|
| 其他备注： |
|
| 附件下载： |
|
|
|
